Cool-to-the-Touch Barrel - Welds UHMW (ultra high molecular weight, requires special tip 1028), PP, HDPE, LDPE, PVC, and ABS thermoplastics at a high production rate (See Welding Tips)
- Heavy duty production welder
- Revolutionary new ventilated barrel that is cool enough to touch safely while in operation
- Accommodates numerous welding tips to perform any type of weld (butt welds, edge welds, corner welds, and overlap welds)
- Steady stream of air ventilates the welding area and blows fumes away from the user
- Temperature range 750 to 1300°F
- Specially designed for welding large areas
- Increases production with high-speed and high-heat welding capabilities
- Pressure switch cuts off electricity if air flow drops— prevents element burn out
- Uses standard shop air and 120V power
- Limited warranty
Learn to weld with our How-to-Weld Video!
Model 1197CH Hand-Held Thermoplastic Welder comes w/ 800W, 120V Element, Air-Cooled Barrel, Pressure Switch, Infinite Heat Control, Air Regulator, Tacking Tip and #1028 Speed Tip. (temperature range from 700°F to 1300°F)
FOB FL
|
Specifications
Element: Stainless-steel-clad ceramic/Nichrome120 volts, 800 watts, 6 amps
Power Cord: 5-foot 16-gauge grounded with oil/water resistant jacket
Air Hose: 5/8-inch vinyl, 12-foot long
Barrel: Air-cooled, all stainless steel construction
Handle: Air-cooled, glass-filled Nylon
Controls: Solid state — fuse protected
Pressure Regulator: 150 PSI inlet, 0-15 PSI outlet with pressure switch and air regulator
Pressure Switch: On at 8 to 9 PSI, off at 4 PSI
Pressure Gauge: 0-15 PSI
Torch: 2.5 pounds, 12 inches
Case: High Impact plastic
|
-Check -Money Order -Purchase Order
