air temperature / relative humidity / air pressure / wind speed / wind direction / solar radiation
From the WS product family of professional intelligent measurement transducers with digital interface for environmental applications.
Integrated design with ventilated radiation protection for measuring: Air temperature Relative humidity Air pressure Wind direction Wind speed Solar Radiation
Available with low-power setting for remote stations with solar power.
Measurement output can be accessed by the following protocols: ASCII, UMB, SDI12, MODBUS
WS501-UMB 8375.U01 Dimensions Ø ca. 5.09" (150mm), Height approx. 11.42" (290mm) Weight approx. 2.87bs (1.3kg) Temperature Principle NTC Measuring range -58...140°F (-50...60°C) Accuracy ±0.2°C (-4...122°F/ -20°C...+50°C), otherwise ±0.5°C (>-22°F/-30°C) Relative humidity Principle capacitive Measuring range 0…100% RH Accuracy ±2% RH Radiation Response Time (95%) 18s Non-stability (change/year) ±1% Non-linearity (0 to 1,000 W/m 2) ±2.5% Directional error (at 80° with 1,000W/m 2) ±20W/m 2 Temperature dependence of sensitivity ±5% (-10 to +40°C) Tilt error (at 1,000W/m 2) ±3% Spectral range (50% points) 300 to 2,800nm Typical signal output for atmospheric applications 0 to 20mV Operating temperature -40 to +80°C Maximum irradiance 1,500W/m 2 Air Pressure Principle MEMS capacitive Measuring range 300...1200 hPa Accuracy ±0.5hPa Wind direction Principle Ultrasonic- 2.4 Ghz Measuring range 0…359.9° Accuracy ±3° Wind speed Principle Ultrasonic- 2.4 Ghz Measuring range 0…60m/s Accuracy ±0.3m/s or ±3% (0…35m/s) General Information Heating 40 VA at 24 VDC Protection type housing IP66 Interface RS 485 2-wire, half duplex Operating power consumption 24 VDC +/- 10% < 4VA (without heating) Operating humidity range 0...100% Operating temperature range -58...140°F (-50...60°C)
More specs and info on
WS501 are available in our downloadable PDF brochure.
for more information on WS501 Ultrasonic Weather Station with solar sensor or call 805-963-7547.
Relative humidity is measured by means of a capacitive sensor element; a precision NTC measuring element is used to measure air temperature. Ultrasound sensor technology is used to take wind measurements. Measurement data are available for further processing in the form of a standard protocol (Lufft-UMB protocol).
CMP3 Solar pyranometer
Ultrasonic wind sensor Maintenance-free operation Open communication protocol: ASCII UMB SDI12 MODBUS RTU Analog outputs in combination with 8160.UDAC