Complete Heating System

Item No: 1250
Product Description

Complete Heating System

Acrylics, ABS, Polypropylene, Polyethylene, PVC, Polycarbonate... and many more

This Heating System prepares all types of thermoplastic materials for forming all-angle bends and reduces fabrication time both in set-up and multiple bend operations. Simple and durable. The plastic does not come in contact with the heating element. Unit is equipped with four independently operated and movable heating trays. Index rules on either side of table allow for precise measurements. Full usage of working area allows you to work from both sides of the table at the same time. The adjustable fence/stop may be positioned as shown or between trays. Simply lay your plastic material on top of the trays; elements are recessed and trays are Teflon-coated to provide professional results. Units are completely self-contained and require no special wiring.

Size
    Outside Dimensions:
    62" Wide x 54" Deep x 5" High
    Inside Dimensions:
    48" Wide x 48" Deep working area
    68/lbs approximate assembled weight
Insulation
  • 1700°F ultra hi-temperature.
  • Heat treated to reduce stress.
  • Sealed and Teflon-coated working surface.
Heating Elements
  • Elements are computer profiled for precise heating
  • Maximum operating temperature of 800°F.
  • .315" Diameter elements on Model #48-48E.
  • .165" Diameter elements on Model #48-48E/4
Model Usage Guide for Material Thickness
  • 48-48AEC 1/8" and thicker material.
    48-48AEC/4 .100" and thinner material
  • Note: Heating Trays have 1.75" center-to-center measurement when put side by side.
  • Advanced electronic controller
  • Custom microprocessor
  • Each Heating Tray is individually controlled.
  • Main ON/OFF switch.
  • Individual power indicator light for each tray.
  • Bult-in line voltage detection
  • Bult-in 3-function timer
  • Low voltage warning
  • Large digital display
Electrical Information
  • Input Voltage 120V AC, 60Hz
  • Maximum Load 120V - 1800 watts
  • Voltage Control Range 0 to 120 volts
  • Control Mode Solid State Phase Angle

This Heating System prepares all types of thermoplastic materials for forming all-angle bends and reduces fabrication time both in set-up and multiple bend operations. Simple and durable. The plastic does not come in contact with the heating element. Unit is equipped with four independently operated and movable heating trays. Index rules on either side of table allow for precise measurements. Full usage of working area allows you to work from both sides of the table at the same time. The adjustable fence/stop may be positioned as shown or between trays. Simply lay your plastic material on top of the trays; elements are recessed and trays are Teflon-coated to provide professional results. Units are completely self-contained and require no special wiring.

GridItemIDItem NoItem InformationPriceOrder Qty
1992FM4848AEC1/2-inch Complete Heating System
$2,139.00
Qty:
1993FM4848AEC-41/4-inch Complete Heating System
$2,275.00
Qty:
5299FM4848AEC-83/8-inch Complete Heating Unit
$2,139.00
Qty:
1545TT48AReplacement heating tray 1/2-inch 48-48AEC
$329.00
Qty:
1546TT48A-4Replacement heating tray 1/4-inch
$379.00
Qty:
1615AEC120Controller
$457.00
Qty:
1512FK1Frame Kit (Frame Only)
$690.00
Qty:
1808FS48TReplacement tray
$329.00
Qty:
1809FS48T-4Replacement 1/4-inch heat tray
$379.00
Qty:
3595FM88076FENCE STOP WITH J BOLT ASSEMBLY
$140.00
Qty: