Monitor each line or zone of your mold with Electronic Flowmeters
** (please note that these Flowmeters will eventually be replaced by the newer VM Series Flowmeters) **
DD-8B LCD Tracer 1" 20 GPM (front)
DD-16B LCD Tracer 2" 110 GPM (back)
Model DDS Tracer Switching Flowmeter remotely powered by 8 to 28 VDC
- 0 - 5 and 0 - 10
- Programmable SPDT switch tied to high or low flow, or high or low temperature conditions to help protect equipment and processes.
- Remotely powered for low maintenance operation.
- Bi-directional flow reading makes installation simple and convenient.
- Metric or English units for flow and temperature are user-selectable.
- 3/8" through 2" NPT(F) inlet/outlet installs easily into existing plumbing.
- Use in injection molding machines, cooling water loops, lube oil systems, blending systems, filter condition indicators, and various non-viscous chemically compatible process liquids.
2" DDS-16B LCD Electronic Switching Flowmeter
With the new Tracer electronic flowmeter, it is easier than ever to know exactly how much water is flowing through your water lines. In addition to flow rate, the Tracer provides a precise temperature reading of the water. and will calculate BTU's. With the new information that the Tracer provides, you can manage your processes more completely and accurately.
Know Your Flow
Water is flowing through each line or zone of a mold. Now you can know exactly how much. Your flow rate is displayed in 100ths of a gallon per minute on the DD-3s and 10th of a gallon per minute on the DD-6 through DD-16. Will also convert to liters per minute.
Know Your Water Temperature
Also provides the current water temperature at the flowmeter. Used on the supply side, this can verify precise water temperature as it enters the mold. Put the Tracer in the out or return side and measure water temperature exiting the mold. Temperature can be displayed in either Fahrenheit or Celsius.
Know Your BTU's
The setup mode of the Tracer allows you to enter the incoming or supply water temperature. Then with the Tracer attached to the return water line, it will calculate BTU's per minute.
The Tracer can be mounted in any position. It can accept flow in either direction, and it has a sight glass on the back for visual verification of flow. Select the optional quick connect fittings and use the Tracer as a test kit to diagnose your water line problems.
|Model Numbers and Dimensions
||Max Dimensions (mm/in)
||0 - 8 gpm
0 - 30 lpm
||3/8" quick connect
||2 - 20 gpm
8 - 76 lpm
||3 - 30 gpm
11 - 114 lpm
||6.5 - 60 gpm
25 - 228 lpm
||10 - 110 gpm
38 - 418 lpm
Add “-SS” suffix to above model numbers for 303 Stainless Steel bodies with NPT threads only.
Stainless Steel Application Note:
Stainless Steel flowmeter bodies are strongly recommended when copper is present in water lines. This includes water treatments such as organic biocides containing copper. Aluminum is susceptible to galvanic action in the presence of copper. Contact us for more information.
Prices FOB MO