Items: 0  My Cart $0.00

    Large area Industrial Ion gun with LED light

    Product Description

    Large area Industrial Ion gun with LED light

    • Very Accurate Ion Balance (± 10V)
    • LED Light for Dust Detection
    • Powerful Airflow (up to 87psi)
    • Silent Nozzle (only 77.3 dBA)
    • Ultra Lightweight (only 0.44 lbs)
    • No External Transformer
    • Long Power Cable (16.4 feet)
    • Designed for Industrial Use

    VESSEL’s powerful BBZ-E industrial ion gun is designed to neutralize and eliminate dust while effectively cleaning the surface on large plastic-made products while working in an upright position.

    The BBZ-E provides a very accurate ion balance (within +/-10V) at a higher air pressure (58-87psi), which results in effective cleaning for blowing contaminants off a large surface area. Using a powerful airflow at 87psi, it can rapidly neutralize an area at a 12” distance in less than 0.7 seconds (or 6” distance in less than 0.5 seconds)!

    Unlike other models, the BBZ-E is outfitted with an integrated LED light beam for visual dust confirmation and does not have an external transformer. Instead, it’s composed of a safe high-frequency piezoelectric transformer that’s built into the handle. This compact design saves valuable workspace and makes it easier to move from one location to another.

    The nozzle angle is ergonomically crafted to help alleviate any burden on the operator’s wrist while pointing to the targeted area for dust removal. It has a non-slip grip (even for clean room gloves), is very compact, and ultra lightweight (only 0.44 lbs). Both sides of the grip have a “green” operating LED and a “red” high-voltage LED, which enables both left and right-handed users to check the operational state at a glance.



    No External Power Transformers
    The ion beam gun has a built-in, compact high-voltage transformer and does not require the space for a conventional external power transformer.
    Preparation of Large Items
    The BBZ-E was designed specifically for the removal of dust and static from the surfaces of large items.


    Sample Application
    When plastic injection molded parts are pulled off the mold, the surface of the product is charged with static electricity. This static electricity from the part draws dust particles from the air to stick onto the surface of the product.

    During a painting process, such dust may cause painting defects. The dust may show up on the finished coat and the surface may not be evenly painted (or coated).

    To avoid such defects, Vessel’s BBZ-E nozzle-type ion gun can be used to neutralize and eliminate static electricity, and to effectively clean the surface of the part before the general painting or coating process.

    Unlike the Vessel BBZ-E ion gun, the traditional static eliminating system would consist of an air gun to discharge ionized air for neutralization, a large transformer to generate high voltage, and a high-voltage cable to connect these components. However, there are some issues with this type of setup. For instance, a large bulky external transformer takes up valuable space and cannot be installed at various work sites. Also, since the cable is constantly bending, it’s prone to break or disconnect which may cause an electric shock.

    Other Surface Cleaning Examples
    • Optical Parts/ Lenses— before clear coat or protective coating
    • Injection Molded Parts— before painting or chroming process
    • Large Trays, Bins, Bottle— before labeling, filling with liquids, etc.
    • Silk-Screening Process— remove dust before applying ink



     for a PDF with more information on the BBZ-E Ion gun.

    ERGONOMIC DESIGN!
    Prevents bending of the wrist


    Specifications and additional product information
    Input Voltage DC 24V ±5%
    Power Consumption 74mA (typ.) with LED Illuminated
    Ion Balance Within ±10V (87psi at 6") [measured values]
    Air Pressure 14.5~87psi
    Weight 0.44 lb (Handle Only) / 2.2 lbs (Complete Package)
    Working Temp. Range 41~104°F / 35~65% RH (no dewing)
    Working Humidity Range 32~140°F / 35~85% RH (no dewing)
    Decay Time ±1000V~±100V, within 0.5sec, 87psi/6" [measured values]
    Indicators Power: Green LED
    HV Alarm: Red LED
    Noise level (at 3.3') 77.3dBA (at 43.5psi) / 85.5dBA (at 87psi)
    Materials Housing, Trigger, Light Switch: ABS Resin (heat-resistant)
    Nozzle, Support Material: ABS (with Glass Fiber)
    Needle Pole Electrode: Tungsten
    Directives CE Marking, RoHS Compliant
    AC Adapter: AD24-ITB-E Rated Input Voltage: 100~240V AC (50~60Hz) 0.4V
    Rated Output Voltage: 24V DC 1.75A 
    DC Input Cable: 8' 
    AC Output Cable: 6'
    GridItemIDItem NoItem InformationPriceOrder Qty
    1634BBZE-115VIon Gun w/115V Power Supply
    $1,145.00
    Qty:
    1821G7SNSilent Nozzle - audible noise reduced 10dB (down 25% from Flared Nozzle)
    $11.39
    Qty:
    2197N2FNFlat Nozzle
    $73.44
    Qty:
    2198N2TNConcent Nozzle
    $22.16
    Qty:
    1816G7HElectrode Needle
    $31.65
    Qty:
    1814G-7DRElectrode Needle Removal Tool
    $14.56
    Qty:
    1815G-7FInline micro air filter
    $92.53
    Qty:
    1820G-7SCSpeed controller
    $48.36
    Qty:
    Loading....