b'Safe & Efficient Acrylic Flame Polishing without gas cylinder storageA reliable, safe-operating solution for your acrylic edge polishing or micro-welding needs.The Aquaflame 500, 800 & 1200 systems create hydrogen and oxygen by the electrolysis of deoinized water, in the ratio such that the hydrogen can be burnt in the oxygen. This produces a high-energy heat source that is highly controllable and efficient. The only other byproduct is water, making it truly efficient and environmentally safe. Model 500 covers a 5mm width w/one pass, Model 800 can cover 10 mm width w/one pass, Model 1200 can cover 15mm width w/one pass. Overall the clean flame and precise control make theOnce the machine is filled it is ready to use. Aquaflame ideal for edge Does not require gas cylinders, so no need polishing or removing lightto store them. Only the addition of deionised scratches on the surface ofwater and MethylEthylKetone (MEK) from acrylics, even intricate shapes, intime to time is required. The fractional cost of a single quick operation. Can alsothese chemicals compared to gas will mean be used for micro-soldering circuitlong-term cost savings.boards, medical instruments, jewelry and dental repairs.LM137K - Aquaflame 1200 Machine with Tips. $ 5,131 (Tips: 2 of #17, 4 of #18, 2 of #19, 4 of # 20 & 2 of #21). 120 VLM136K - Aquaflame 800 Machine with Tips. $ 3,299 (Tips: 4 of #18, 2 of #19, 4 of #20, 4 of #21). 120 VLM135K - Aquaflame 500 Machine with Tips$ 2,668 (Tips: 6 of #20, 2 of #21). 120 VLM138 - Additional Torchlighter$ 81One Torchlighter is included with each machine.Chemicals must be obtained from chemical supplier.Visit Abbeon.com(Plastic Assembly)for more information & VideoCatalog 122P www.Abbeon.com(800) 922-0977(805) 676-0720 31'