Product Description
Free Standing Heating Trays 120V
Bend plastic without contacting the heat source
Ideal for making single bends or making your own system
Free-Standing Heating Trays
Bend Plastics to Perfection (Line Bending)
The heating element is recessed and never comes in contact with your plastic. The result is a professional bend every time.
These heating trays have been exclusively designed to give constant professional bends while working with all types of thermoplastic materials. Acrylics, ABS, PVC, CPVC, Polypropylene, Polyethylene, Polycarbonate and many more. They are essentially used for straight line bends or folds, capable of heating up to 1/2" thick material. All trays come with a standard 120-volt pigtail and are ready for operation.
Multiple units may be purchased for multiple bends or to build your own system. The temperature of two heating trays can be controlled with the AEC-15 Power Control (We are sorry but the AEC15 will not be available until Winter 2022, early 2023).
(see below).
"A" dimension
channel width: |
1/4"
|
3/8"
|
1/2"
|
1"
|
2"
|
Recommended thickness: |
1-2mm
( .04-.078")
|
2-4mm
(.078-.157")
|
3-13mm
(.11-.5")
|
3-25mm
(.11-.98")
|
3-25mm
(.11-.98")
|
All Free-Standing Heating Trays run on standard 120-volts and have a maximum operating temperature of 800°F. Temperature can be adjusted using the PC power control.
FS96 Shipping: We will contact you with shipping cost information on this item. The FS120 ships by LTL Freight only.
Model |
FS24 |
FS48-4240 |
FS48 |
FS48-240 |
FS48-4 |
Heated Width/Length |
1/2" x 24" |
1/4" x 48" |
1/2" x 48" |
½" x 48" |
1/4" x 48" |
Total Length of Tray |
35" |
59" |
59" |
59" |
59" |
Watts/Amps |
220/1.8 |
330/1.4 |
430/3.6 |
430/1.8 |
330/2.75 |
"A" Dimension |
½" |
¼" |
½" |
½" |
¼" |
|
|
|
|
|
|
Model |
FS72 |
FS96 |
FS48W2 |
FS3-48 |
FS3-48-4 |
Heated Width/Length |
½" x 72" |
½" x 96" |
2" x 48" |
*1/2 x 48" |
* 1/4 x 48" |
Total Length of Tray |
83" |
107" |
59" |
59" |
59" |
Watts/Amps |
525/4.4 |
800/6.7 |
860/7.2 |
860/7.2 |
660/5.40 |
"A" Dimension |
½" |
½" |
2" |
½" |
¼" |
|
|
|
|
Dual Element
|
Dual Element
|
Model |
FS48W1 |
FS48-8 |
FS120 |
|
Heated Width/Length |
1"x48" |
3/8"x48" |
1/2"x120" |
Total Length of Tray |
59" |
59" |
131" |
Watts/Amps |
860/7.2 |
350/3.0 |
700/6 |
"A" Dimension |
1" |
3/8" |
1/2" |
* 3 inch Wide Tray, Dual elements with 1" minimum center-to center on 1/2" elements and
3/4" minimum on 1/4" elements, for use where two bends are very close together. Custom Tray non returnable, you must specify distance between bends, Center to Center, mention when you order in the notes upon checkout.
Our FS120, 10 foot heat tray max temperature is 650F, Must ship by LTL Freight.
|
Replacement Elements |
Models: |
FS-24: FM11008 |
FS-48: FM11007 |
FS48-4:
FM11009 |
FS72: FM9958 |
FS96: FM11006 |
FS48-240: FM11007-240 |
FS48W2:
FM11007 |
FS3-48: FM11007 |
FS3-48-4:
FM11009 |
FS48W1:
FM11007 |
FS48-8:
FM11003
|
FS48-4240: FM11009-240 |
|
- Solid state microprocessor
- On/Off switch
- Power indicator light
- Power adjustment knob
- Low voltage indicator
- Dual outlet
- 120 volts, 15 amps
This robust power controller uses a digital microprocessor for overload protection. If the controller senses an overload, it will automatically limit the current flow to 15 amps and warn you with the indicator light. This unit also has a low voltage indicator light that tells you if your supply voltage drops below 100 volts. Comes with an anodized aluminum housing and internal cooling fan. The AEC-15 can also be used for some hot wire applications.