Item No: TS30

Heavy duty 30mm blade for removing plastic linings in storage tanks

AZ Formen, Thermocutter, Hot Knife, AZTC-20, Zetz 24

See all items from Thermocutters
Product Description

Heavy duty 30mm blade for removing plastic linings in storage tanks
Choose the blade to suit the purpose. These blades are designed so that heat is concentrated along the cutting edge in order to achieve the optimum cutting temperature. Prior to insertion in the material to be cut, the temperature of the blades will be between 100°C and 800°C, depending on the type of blade and the thermocutter used. The temperature to the blade cools down as it enters the material. The temperature depends on the thermal properties and heat conductivity of the material being cut and determines the cutting speed. The cutting edge is evenly heated because of the design of the blade's cutting flanges.

Blades with model numbers in green are for use only with the ZETZ-24 and 25 Thermocutters.

  • Suitable for thermoplastics with higher melting points such as rubber, synthetic rubber, synthetic resins
  • Cutting rubber up to 90 Shore combustible, oil resistant rubber.
  • Cutting out rubber linings on containers, mixers, vibration and, conveyor chutes and troughs.
  • Angled cuts at joints on conveyor belts, camelbacks, rubber anti-abrasion coatings.
  • Cutting and peeling rubber sectioning belts and flexible PVC (supported or unsupported).
Heavy duty blade designed for removing plastic/rubber linings inside storage tanks. Scoop design with 3/8" sides. For use with ZETZ-24 only.
Blades Thickness Cutting Edge Length
TS 30 1.0 mm 30 mm

$28.49