Vibration Isolation: Vibration Isolation Pads

Of all the leveling devices, Wedge Jacks provide the most rigid support after adjustment. All jacks have mating parts with spherical seats that allow automatic adjustment for up to 7° of transverse ...

With more than three times the static deflection of pads, double deflection neoprene isolators notably improve vibration control. Isolated equipment runs quieter and more reliably with less internal wear. ...

Bolting is not necessary on most installations. When the equipment has a flush drain pan or tank on the bottom, mounts can be inverted so the baseplate provides support over a larger area. ND Mounts ...

Inexpensive, Easy to use. Single Package Air Conditioners and Heat Pumps • Fan Coil Units • Condensing Units • Electronic Air Cleaners • Beverage Coolers • Pumps ...

The all-rubber Super W pad is usually the best pad for isolating vibration. However, many contractors are used to the cork and rubber composite pad and are hesitant to change. We have a new cork and rubber pad, ...

ML-Leveling and Shock Mounts This classic style of machinery leveling mount is the most widely accepted and has been in use for over 40 years. The simplicity of up to 5/8' leveling with a single ...

Tested to withstand extreme vibration and high wind ...

Light duty Hangers. WHR Neoprene Hangers are an inexpensive method of reducing noise and minor vibration transmission. Noise breaks for use with wire, chain or horizontal screws for ceiling hung applications. ...

Bolt and Rod Isolation Washer Bushings are for isolating noise and serve as minimum isolation of vibration where mounts and hangers are not required. They are made of high quality bridge-bearing neoprene for ...

R & RL Neoprene Machine Leveling Mounts A handy leveling mount for small high speed equipment. Mounts can be used without leveling bolts (R) or with (RL). Furnished with 3/8 - 16 or 1/2-13 tapped holes ...

PB (Panel Board) Mounts: (See image above, also view our Specs and Diagram sheet in Video and Docs tab above) Item / Size Capacity (lbs) A Dia (In) B Dia (In) C (In) Hold ...

HMIB - Hangar Mount Isolated Bushing Up until the 1950’s most rubber mountings were designed to take the load in shear. Mountings were circular or sold in long strips, so the capacity could be ...

Neoprene Impregnated Duck Tube Bushings. Please call us for prices 800-922-0977, or send us an email from our Contact page here . (See Video and Docs tab for more specifications) ...

HLW Multiple Layer Neoprene Impregnated Duck Washers Up until the 1950’s most rubber mountings were designed to take the load in shear. Mountings were circular or sold in long strips, so the ...