Items: 0  My Cart $0.00
    Related Items
    Product Description


    One pass deburring and safety edging of plastics or sheet metal

    • Easily brought to the work site
    • For use as both a hand or as a bench-mounted tool
    • Breaks sharp edges on parts at mill, saw or shear

    Perfect for deburring and edge finishing of

    • Plastics
    • Ferrous and non-ferrous metals
    • Stainless steel
    • Aluminum
    • Laminates
    • Printed circuit boards

    • Lightweight— only 3½ pounds
    • One pass deburring and safety edging of plastics or sheet metal
    • Light chamfering up to .075" depth of cut
    • High speed (55,000 rpm) produces clean, machined edges
    • Easily adjusted depth of cut
    • Handle features handy storage for cutters and wrenches

    Turbo-Burr, Model S
    With closed-bottom “V” block
    Suitable for most applications

    Turbo-Burr, Model R
    With a small gap at the bottom of the V” block
    Suitable for materials 0.135 inch and heavier,
    where large burrs are present.

    Applications Reference Chart
    Burr Pattern
    Model SA-1 SA-1DC SA-1DIA SA-1NF
    Description Spiral Cut Double Cut Diamond Cut Five Flute
    Use and Finish Improved finishes Rapid removal, reduced finish Aggressive removal,
    reduced finish
    Rapid removal,
    good finish
    Aluminum X
    Brass, Bronze, Copper X X
    Carbon X
    Circuit Board Connnectors X
    Fiberglass X
    Cast Iron X X X
    Malleable Iron X X X X
    Magnesium Alloys X X X
    Masonite X X
    Plastics X
    Hard Rubber X
    Steel - Carbon X X X X
    Steel Alloy 40-55 Rc X X X X
    Steel Alloy 55-60 Rc X X X X
    Steel - Nickle Chrome X X X X
    Stainless Steel X X X X
    Steel - Weldments X X X X
    Titanium X X X X
    Zinc Alloy X

    All Prices FOB MI

    Specifications and additional product information
    Rotation Speed 55,000 rpm (no load speed)
    Air Consumption 5 to 11 cfm - lubrication not needed
    Air Pressure 60 to 120 psig
    Air Hose 1/4"
    Minimum Material Thickness 0.015"
    Collet 1/4" - compression type
    Burr Type 1/4" dia. x 2" length overall - solid carbide
    Depth of Bevel 0 to .075 inches at 45°
    Feed Speeds up to 2 inches per second
    Weight 3.5 pounds (1.6kg)
    GridItemIDItem NoItem InformationPriceOrder Qty
    104MODEL STurbo Burr
    103MODEL RTurbo Burr
    3485SA1Spiral cut Turbo Burr cutter
    2325SA1DCDouble Cut Turbo Burr cutter
    2326SA1DIADiamond Cut Turbo Burr Cutter
    2327SA1NFFive flute Turbo Burr Cutter