Item No: KITGFHWH

Hot Wire Handle Foam Cutter Kit 2' to 8'


Product Description

Hot Wire Handle Foam Cutter Kit 2' to 8'
Hot Wire Handle Foam Cutter Kit 2' to 8'

See our Video & Docs tab for one page flyer on this item

Includes:
  • Hot Wire Handles
  • MAGNUM Controller
  • 100-foot Roll of NW100
  • Carrying Case
Safety Tips

Power Controller – Use nothing longer than a 50 foot 12/3 grounded extension cord. Set the temperature dial on the controller to zero (0). Turn on the hot wire power controller and adjust the dial until the wire glows orange. Immediately back off the controller until the heated wire just begins to turn from orange to gray. This is the optimum foam cutting temperature of the wire. Anything hotter will cause premature wire failure or anything cooler will require too much feed pressure on the wire causing premature failure. If the wire is too hot, the cut may not be as accurate as you would like. A wire that is too hot will melt the foam too quickly at the beginning of the cut and less quickly as the wire cools off resulting in an inaccurate cut.
  • Use only the recommended wire.
  • Do not use this equipment in wet or damp conditions.
  • Use only grounded receptacles.

Resources
Brochure
Download the PDF brochure for more infoHot Wire Basics - 1 page
$1,143.90