Items: 0  My Cart $0.00

    Standard Ion Air Knife


    Product Description

    Standard Ion Air Knife

    A sheet of ionized air is an effective way to eliminate static and clean parts or materials!


    Applications
    Molding machinery
    Sheeters and trimmers
    Cleaning parts
    Pre-paint dust removal
    Shrink wrappers
    Package cleaning
    Bag opening/ fill operations

    Advantages
    Reduced air consumption
    30:1 air amplification
    Low noise level
    Effective up to 20 feet (6.1m)
    Shockless, non-radioactive
    Compact, rugged, easy to install
    Unlimited system lengths
    Low maintenance
    Variable force and flow



    Performance
    Pressure
    Supply
    Air
    Consumption*
    Sound
    Level
    Dissipates
    5kV**
    PSIG BAR SCFM SLPM dBA SECONDS
    5 0.3 2.9 82 66 0.55
    10 0.7 4.3 122 68 0.40
    20 1.4 16 453 69 0.25
    40 2.8 24 679 78 0.20
    60 4.1 32 906 84 0.18
    80 5.5 41 1160 87 0.18
    100 6.9 49 1387 90 0.18
    * per foot (30cm) of length
    ** 6" (15cm) from target

    Our Standard Ion Air Knife removes static electricity from plastics, webs, sheet stock and other surfaces where tearing, jamming or hazardous shocks are a problem.

    The air knife carries ions from an ionizing bar to the charged surface— up to 20 feet away. The air knife (30:1 air amplification) provides fast static decay and strong blowoff force for cleaning and has no moving parts. This force can be adjusted from a “blast” to a “breeze” and is electrically powered and shockless.

    Compressed air inlets are provided on each end of the air knife. For long spans, multiple Standard Ion Air Knives can be connected end-to-end. Special length ionizing bars up to 120" are available for multiple air knife applications. Meets OSHA dead-ended pressure and noise requirements.

    Specifications and additional product information

    Specifications
    The Standard Ion Air Knife is available in seven standard lengths: 3", 6", 12", 18", 24", 30" and 36". Shielded power cable with ground and assembled bayonet connector are included.

    Model EX7960 Power Supply is required for bar operation. The power supply is equipped with a 6' power cord, lighted power switch and two high voltage outlets. Power supplies are UL Listed to U.S. and Canadian safety standards.

    Certifications: Ionizing bars are UL Component Recognized, CSA Certified.
    Compressed Air: 1/4" NPT inlets are provided on each end.
    Electrical: For use with 5 kVrms, 5 milli-amperes (max.) power supply,
    Model EX7960 (115V).
    Electrical Hazard: Ionizing bars are shockless (less than 40 microamperes short circuited).

    Do not use near flammable materials or gases.
    Materials of Construction:
    Standard Air Knife— Aluminum
    Ionizing Bar Channel Aluminum
    Plastic Parts— UL rated 94 HB
    Emitters— Stainless Steel
    Maximum Ambient Temperature: 165°F (74°C)
    Shims: Thicker shims can be installed easily if additional hard hitting velocity is required.



    Standard Ion Air Knife Only
    Consists of the Standard Air Knife and Ionizing Bar assembly. FOB OH

    Standard Ion Air Knife System
    Includes a Standard Ion Air Knife and Model EX7960 Power Supply

    Standard Ion Air Knife Kits
    Includes a Standard Ion Air Knife, Model EX7960 Power Supply, shim set, filter separator and pressure regulator.

    Resources
    Brochure
    EX8103
        
    $322.00
    Quantity
    EX8106
        
    $392.00
    Quantity
    EX8109
        
    $442.00
    Quantity
    EX8112
        
    $491.00
    Quantity
    EX8118
        
    $581.00
    Quantity
    EX8124
        
    $662.00
    Quantity
    EX8130
        
    $776.00
    Quantity
    EX8136
        
    $862.00
    Quantity
    EX8142
        
    $959.00
    Quantity
    EX8148
        
    $1,069.00
    Quantity
    Loading....