Product Description
Standard Ion Air Knife Kits
A sheet of ionized air is an effective way to eliminate static and clean parts or materials!
- Standard Ion Air Knife Only Consists of the Standard Air Knife and Ionizing Bar assembly.
- Standard Ion Air Knife System Includes a Standard Ion Air Knife and Model 7960 Power Supply
- Standard Ion Air Knife Kits Includes a Standard Ion Air Knife, Model 7960 Power Supply, shim set, filter separator and pressure regulator.
Applications
Molding machinery
Sheeters and trimmers
Cleaning parts
Pre-paint dust removal
Shrink wrappers
Package cleaning
Bag opening/fill operations
Advantages
- Reduced air consumption
- 30:1 air amplification
- Low noise level
- Effective up to 20 feet (6.1m)
- Shockless, non-radioactive
- Compact, rugged, easy to install
- Unlimited system lengths
- Low maintenance
- Variable force and flow
FOB: OH
| Performance |
Pressure
Supply |
Air
Consumption* |
Sound
Level |
Dissipates
5kV** |
| PSIG |
BAR |
SCFM |
SLPM |
dBA |
SECONDS |
| 5 |
0.3 |
2.9 |
82 |
66 |
0.55 |
| 10 |
0.7 |
4.3 |
122 |
68 |
0.40 |
| 20 |
1.4 |
16 |
453 |
69 |
0.25 |
| 40 |
2.8 |
24 |
679 |
78 |
0.20 |
| 60 |
4.1 |
32 |
906 |
84 |
0.18 |
| 80 |
5.5 |
41 |
1160 |
87 |
0.18 |
| 100 |
6.9 |
49 |
1387 |
90 |
0.18 |
* per foot (30cm) of length
** 6" (15cm) from target |
Our Standard Ion Air Knife removes static electricity from plastics, webs, sheet stock and other surfaces where tearing, jamming or hazardous shocks are a problem.
The air knife carries ions from an ionizing bar to the charged surface— up to 20 feet away. The air knife (30:1 air amplification) provides fast static decay and strong blowoff force for cleaning and has no moving parts. This force can be adjusted from a “blast” to a “breeze” and is electrically powered and shockless.
Compressed air inlets are provided on each end of the air knife. For long spans, multiple Standard Ion Air Knives can be connected end-to-end. Special length ionizing bars up to 120" are available for multiple air knife applications. Meets OSHA dead-ended pressure and noise requirements.
Specifications
The Standard Ion Air Knife is available in seven standard lengths: 3", 6", 12", 18", 24", 30" and 36". Shielded power cable with ground and assembled bayonet connector are included.
Model 7901 Power Supply is required for bar operation. The power supply is equipped with a 6' power cord, lighted power switch and two high voltage outlets. Power supplies are UL Listed to U.S. and Canadian safety standards.
Certifications: Ionizing bars are UL Component Recognized, CSA Certified.
Compressed Air: 1/4" NPT inlets are provided on each end.
Electrical: For use with 5 kVrms, 5 milli-amperes (max.) power supply,
Model 7901 (115V).
Electrical Hazard: Ionizing bars are shockless (less than 40 microamperes short circuited).
Do not use near flammable materials or gases.
Materials of Construction:
Standard Air Knife— Aluminum
Ionizing Bar Channel3 Aluminum
Plastic Parts— UL rated 94 HB
Emitters— Stainless Steel
Maximum Ambient Temperature: 165°F (74°C)
Shims: Thicker shims can be installed easily if additional hard hitting velocity is required.