Standard Ion Air Knife System


Product Description

Standard Ion Air Knife System
A sheet of ionized air is an effective way to eliminate static and clean parts or materials!

FOB: OH.

Applications
Molding machinery
Sheeters and trimmers
Cleaning parts
Pre-paint dust removal
Shrink wrappers
Package cleaning
Bag opening/fill operations

Advantages
Reduced air consumption
30:1 air amplification
Low noise level
Effective up to 20 feet (6.1m)
Shockless, non-radioactive
Compact, rugged, easy to install
Unlimited system lengths
Low maintenance
Variable force and flow

 

Performance
Pressure
Supply
Air
Consumption*
Sound
Level
Dissipates
5kV**
PSIG BAR SCFM SLPM dBA SECONDS
5 0.3 2.9 82 66 0.55
10 0.7 4.3 122 68 0.40
20 1.4 16 453 69 0.25
40 2.8 24 679 78 0.20
60 4.1 32 906 84 0.18
80 5.5 41 1160 87 0.18
100 6.9 49 1387 90 0.18
* per foot (30cm) of length
** 6" (15cm) from target

Standard Ion Air Knife Only
Consists of the Standard Air Knife and Ionizing Bar assembly.

Standard Ion Air Knife System
Includes a Standard Ion Air Knife and Model 7901 Power Supply

Standard Ion Air Knife Kits
Includes a Standard Ion Air Knife, Model 7901 Power Supply, shim set, filter separator and pressure regulator.

Our Standard Ion Air Knife removes static electricity from plastics, webs, sheet stock and other surfaces where tearing, jamming or hazardous shocks are a problem.

The air knife carries ions from an ionizing bar to the charged surface— up to 20 feet away. The air knife (30:1 air amplification) provides fast static decay and strong blowoff force for cleaning and has no moving parts. This force can be adjusted from a “blast” to a “breeze” and is electrically powered and shockless.

Compressed air inlets are provided on each end of the air knife. For long spans, multiple Standard Ion Air Knives can be connected end-to-end. Special length ionizing bars up to 120" are available for multiple air knife applications. Meets OSHA dead-ended pressure and noise requirements.

Specifications and additional product information
The Standard Ion Air Knife is available in seven standard lengths: 3", 6", 12", 18", 24", 30" and 36". Shielded power cable with ground and assembled bayonet connector are included.

Model EX7960 Power Supply is required for bar operation. The power supply is equipped with a 6' power cord, lighted power switch and two high voltage outlets. Power supplies are UL Listed to U.S. and Canadian safety standards.

Certifications: Ionizing bars are UL Component Recognized, CSA Certified.
Compressed Air: 1/4" NPT inlets are provided on each end.
Electrical: For use with 5 kVrms, 5 milli-amperes (max.) power supply,
Model EX7960 (115V).
Electrical Hazard: Ionizing bars are shockless (less than 40 microamperes short circuited).

Do not use near flammable materials or gases.

Materials of Construction:
Standard Air Knife—
Aluminum
Ionizing Bar Channel3 Aluminum
Plastic Parts— UL rated 94 HB
Emitters— Stainless Steel
Maximum Ambient Temperature: 165°F (74°C)
Shims: Thicker shims can be installed easily if additional hard hitting velocity is required.
Resources
Brochure
Download the PDF brochure for more info23 page Static Products brochure
Download the PDF brochure for more info2 page Standard Ion Air Knife