Items: 0  My Cart $0.00

    Bending Tables ART65 (2') & ART125 (4')


    Product Description

    Bending Tables ART65 (2') & ART125 (4')
    ART65 (2') & ART125 (4') Bending Tables  (Line Bending)

    Without pneumatic top frame

     The ART65 and ART125 have adjustable stops with a scale calibrated in either millimeters or inches. The height and temperature of the heating wires can be independently and continuous adjusted. The reflectors are easily adjustable. Special made fixtures, under frames and foil bending profiles are available as accessories.



     ART65 - 2' Adjustable Bending Table
     - ART652xDB with 2 Heat Trays & 1 Controller $2,400
     - ART654xD4 with 4 Heat Trays & 2 Controller $3,700

     ART125 - 4' Adjustable Bending Table

     - ART1252xDB with 2 Heat Trays & 1 Controller $4,000
     - ART1254xDB with 4 Heat Trays & 2 Controller $5,600

    Accessories to Bending Table

    Under-profile reflector with 3 wires. Ideal for bending big radius.

    A range of reflectors are available with a variety in length, width and multiple heating-wires. Reflectors top and bottom up to 250 mm. in width and with 12 wires each have been made. Our standard multiple wire reflectors with 2 to 4 wires and 30 to 120 mm. in width are capable of bending plastic sheets up to 25 mm. thickness and ideal for bending a big radius.

    Foil profiles

    Thin sheets (0,3 to 1,5 mm.) can be bent straight with no distortion with our teflon coated foil bending profiles. These profiles are also perfect for bending Forex or foamed PVC to prevent ‘ears’ on the sides of the bends so cutting of these deformed sides after bending is not needed. The foil bending profiles are also available with a double contact-back to make 2 very close bends possible. A range of back-sizes are available (from 2 to 10 mm. width). Our standard lengths: 50, 65 and 125 cm.

    MOBILE UNDERFRAME WITH WHEELS & BRAKE


    Prices FOB CA

    Specifications and additional product information
    ART65 (2 foot table):
    • Standard construction EV regulating unit = to control 1 wire. 
      DB regulating unit = to control 1 or 2 wires. 2x EV regulating unit and 2x under reflector
    • Distance between reflectors (center to center) 15 – 510 mm (.6 – 20 in)
    • ART652xDB with 2 heat trays and 1 controller
    • ART654xD4 with 4 heat trays and 2 controllers
    • Size: 32"W x 22"D x 11"H
    • Work Surface: 26"W x 21"D
    • Working length 65 cm (25.6 in)
    • Height open: 26"
    • Heating Under Sheet thickness 0.4 (.015 in) - 6 mm (.23 in)
    • Weight 70 kg (154 lbs)
    • Connection voltage 220 - 230 Volt.
    ART125 (4 foot table):
    • Standard construction EV regulating unit = to control 1 wire. 
      DB regulating unit = to control 1 or 2 wires. 2x EV regulating unit and 2x under reflector
    • Distance between reflectors (center to center) 15 – 620 mm (.6 – 24 in).
    • ART1252xDB with 2 heat trays and 1 controller
    • ART1254xDB with 4 heat trays and 2 controllers
    • Size: 58"W x 27"D x 11"H (on bottom deck)
    • Work Surface: 49"W x 26" D
    • Working length 125 cm (49 in)
    • Height open: 29"
    • Heating Under Sheet thickness 0.4 (.015 in) - 6 mm (.23 in)
    • Weight 90 kg (198 lbs)
    • Connection voltage 220 - 230 Volt
    Resources
    Brochure
    ART652XDB
        
    $2,400.00
    Quantity
    ART654XDB
        
    $3,700.00
    Quantity
    ART1252XDB
        
    $4,000.00
    Quantity
    ART1254XDB
        
    $5,600.00
    Quantity
    HRW198
        
    $16.00
    Quantity
    Loading....